*New Release* 

DIGITRAX ZEPX 3.0 AMP ZEPHYR *EXTRA* ALL-IN-ONE COMMAND STATION, BOOSTER, THROTTLE & POWER SUPPLY STARTER SET 

• Everything you need to get started in Digitrax Command Control for a great low price.

• Zephyr Xtra is perfect for beginning, intermediate and advanced model railroaders. It is easy to use and has tons of features.

• Zephyr Xtra offers excellent speed control, prototypical consisting, the full range of programming features and much more.

• Zephyr Xtra is a breath of fresh air in model railroading.

• Zephyr Xtra Set Includes:

• DCS51 All-In-One Throttle/Command Station/Booster to run your layout

• PS314 Power supply to provide power to run your DCS51

• One LT1 LocoNet Cable & Decoder Test Kit

• Quickstart Guide
  
  
• Zephyr Xtra Manual
  
  
• Digitrax Decoder Manual

  Zephyr Xtra Offers:

  • Simple to use controls for running trains.

  • Large speed control knob and direction switch with brake.

  • Full numeric key pad.

  • Easy 2 and 4 digit addressing.

  • Smooth speed control.

  
  Run multiple trains at once without blocking!

  • Run up to 20 addresses at the same time on your system.

  • Run up to 20 throttles at the same time on your system.

  
  Jump Ports for using DC power packs as additional throttles

  • Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.

  • Simple, cost effective way to add more throttles to your Zephyr Xtra set.

  • Makes it easy to share the fun of DCC with layout visitors and young operators.

  • Functions on locos controlled by Jump throttles remain active.

  
  Over 9000 Locomotive Addresses

  • Use Address 00 to run one or more locos without DCC decoders

  • Two Digit Addressing is easy to use. (Address 01-127)

  • Four Digit Addressing-use the number painted on your engines as its address.

  3.0 Amps of Power to run multiple trains.

  • Booster outputs 13V DC for safe operation in N and HO scales.

  
  Function Control

  • Control 29 functions-F0 through F28.

  • Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.

  • Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).

  
  Stationary Decoders, Turnout Control & Turnout Position Reporting

  • Access to stationary decoder control for turnouts and other devices.

  • Control 999 stationary decoder addresses.

  
  Consisting

  • Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.

  • Advanced consisting, allows only advanced consist capable mobile decoders.

  • Basic consisting, program decoders to run on same address.

  
  Decoder Programming

  • Built in read/write programmer that can read and write all CVs.

  • Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.

  • Operations mode programming can be used to program decoders on the layout.

  
  Expandability with Digitrax LocoNet

  • Use Zephyr Xtra as a starting point for your Digitrax LocoNet System, then add components.

  • Use Zephyr Xtra as an expansion set with Digitrax equipment you already have installed.

  • Add Radio or IR via LocoNet. Just plug in a UR90 or UR91 receiver and add IR and/or Radio throttles.